Description
SQ-720003 One-component UV light hardening liquid is mainly used for hardening the surface of PC, PET, PMMA, PC/PMMA composite sheet or film. It can be coated by spraying, curtain coating, roller coating, etc. After the coating is formed into a film, it has good adhesion to the substrate and can protect the surface of the coated material for a long time. The coating process is simple and the production efficiency is high. The coating has good optical properties, no rainbow pattern, high cross-linking density, low curing shrinkage, extremely high hardness, excellent wear resistance, and good anti-graffiti performance. It can be used to make texture decoration and shell molding of mobile phones, notebook computers, home appliances and other products. The product has high hardness, good chemical resistance, high transparency and stain resistance, and steel wool resistance 1000-3000 times.
Chemical & physical data
| Appearance |
Transparent liquid |
| Viscosity (rock -2 cup) |
8.5-9.5 |
| UV Component (solid content %) |
35±2 |
| Density (g/cm3,25ºC) |
0.90±0.05 |
| Coating hardness (1kg load) |
3H-5H |
| Coating thickness( μ m) |
5-15 |
| Boiling performance (100 ºC / 60min) |
Adhesion 5b |
| Bending (cylindrical shaft diameter) |
40nm |
| Curing energy (Curing machine, MJ / cm2) |
600-1000 |
| QUV resistance |
500h |
Wear resistance (1kg load, wear resistance)
Machine, 1 * 1 grinding head, 0000# steel velvet) |
2500times |
| Water contact angle |
105-110 ° |
| Graffiti proof (Zebra oil pen) |
oil repellent, easy to wipe off |
| Note: the above performance parameters can be customized according to customer requirements |
Performance
The product is suitable for hardening the surface of PC, PET, PMMA, PC/PMMA composite sheet and other sheet and film material; Oil-proof pen for graffiti, easy to clean, water contact angle 105-110°;
Slick hand feeling
Excellent wear and scratch resistance, more than 2500 times of steel wool resistance;
Good wetting performance to the substrate, low surface energy of the coating after film formation;
High and low temperature resistance, high humidity, chemical solvent resistance, moisture resistance, UV resistance and other effects are good, and the performance of the product remains stable in harsh environments.
Application
It is mainly used to make texture decoration and shell forming of mobile phones, laptops, household appliances and other products
Construction technology
1. The commonly used coating methods of UV type wear-resistant and hardening liquid are spraying, curtain coating and roller coating, please avoid exposure to sunlight;
2. The product does not need any pretreatment (including dilution), and it is recommended to shake before coating to make the dispersion more uniform;
3. When performing spray coating, the spray coating equipment nozzles are sprayed from the same horizontal line from left to right, and the specific process refers to the guidance of the equipment manufacturer;
4. After the spray coating is completed, keep the plate running vertically for about 2 minutes, so that the surface can be volatilized and leveled, and then enter the drying tunnel at 60-70 °C to maintain vertical heating for 5 minutes;
5. After heating, enter the UV curing lamp area for conventional curing. The specific curing time is recommended to be adjusted according to the energy of the lamp. If conditions permit, the time can be appropriately extended to improve the hardness of the film layer; (The energy of the UV curing lamp in the test experiment is 2000W, Tube length 30cm)
6. After curing, the performance of the board can be directly measured after cooling to room temperature;
7. After spray coating, please use organic solvent to thoroughly clean the equipment.
Notes
1. This product has been diluted to the solid content and viscosity suitable for coating. It does not need to be diluted before use,
If customers need products with high solid content and can be opened and diluted, our company can provide them according to customers' specific requirements
Corresponding products with high diluent and solid content;
2. This product contains inflammable components. Pay attention to fire prevention during transportation, storage and use.
Product photos
Application
Factory Tour
Lencolo's exhibition
Lencolo's team memebers
Fast and cost-effective shipping service
FAQ
1) Are you a factory or trading company ?
A: We are a professional factory with over 5 years producing experience, warmly welcome to visit our factory anytime.
2) MOQ
A: 1KG
3) How about testing samples?
A: We can provide free samples for your testing, please contact us and inform us your detailed requirements.
4) What about the lead time?
A: Samples within 3 working days, mass production around one to two weeks.
(The specific delivery time would be determined by the ordered products and quantity)
TDS and SAMPLE are avaiable for evaluation, Should you have any question, please feel free to contact us.
){kind=link}