Sq-730002 UV Adhesive Glue for Glass and Metal

• CAS No.: UV Adhesive for Glass and Metal
• Formula: UV Adhesive for Glass and Metal
• EINECS: UV Adhesive for Glass and Metal
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SQ-730002
• Molecular Principal Chain: UV Adhesive for Glass and Metal
• Color: Transparent Liquid
• Viscosity(25°c Cps): 600-850
• UV Ingredients %: 100
• Transport Package: Barrel
• Specification: 1KG
• Trademark: Lencolo
• Origin: China Guangdong
• Production Capacity: 50000kg
• Package Size: 58.00cm * 58.00cm * 97.00cm
• Package Gross Weight: 218.000kg

Product Description

Description
SQ-730002  One-component UV adhesive is mainly used for bonding glass, stainless steel, aluminum and other substrates. Especially in the bonding of glass and metal film, the bonding force is very strong. The product has the characteristics of low viscosity, strong adhesion, high transparency and good weather resistance. Can be used to bond and seal electronic components, toys, crafts, gifts, mobile phone sheath and other fields of material.

Chemical & physical data

Appearance	Transparent liquid
Viscosity (25ºC,cps)	600--850
Density (g/cm3,25ºC)	1.03±0.05
UV ingredients %	100
Hardness (Shore D)	60±5
Coating thickness (μm)	10-200
Curing energy (Curing machine, MJ / cm2)	600-1000
Tensile strength (MPa,)	20±2
Elongation at break (%)	240±20
Transmittance(%)	≥94
Note: the above performance parameters can be customized according to customer requirements

Performance
Good adhesion to glass, stainless steel, aluminum and other substrates, and high adhesion strength;
Fast curing speed, positioning in 1 second, complete curing in 10-20 seconds;
Good yellowing resistance and good transparency;
Low volume shrinkage;
It has good effects of high and low temperature resistance, high humidity, moisture resistance and UV resistance, and the product performance remains stable in harsh environments.

Application
Bonding and sealing of materials in the fields of electronic components, toys, handicrafts, gifts, mobile phone sheaths and other products of mobile phones, notebook computers, home appliances and other products. It also has excellent bonding strength for the bonding between metal, glass, fiber products and rigid plastics. It is suitable for electronic products that need to be glued and fixed.

Construction technology
1. One of the two substrates to be bonded is transparent and the surface is clean, dry and free of grease.
2. Apply UV glue on the surface of one of the substrates, close the two substrates, and compact them with the corresponding tools, so that the two can be better covered without air bubbles. The gluing method can be manual or automatic dispensing machine.
3. Irradiate with a UV lamp with a wavelength of 265 or 395 nm. When lighting from the center to the periphery, and confirm that the light can really penetrate the bonding area. It is recommended to light for about 6s. During the initial positioning, after removing the remaining glue on the workpiece, re-light until it is completely cured; the curing time should be different according to different materials, glue thickness, and ultraviolet intensity. It is recommended that users purchase a UV intensity tester and perform a light intensity test before bonding to reduce the reject rate.
4. The temperature also has a little effect on the activity of the glue. When the temperature is low, the curing time should be appropriately extended; during operation, the materials to be bonded should not be squeezed and repeatedly rubbed. It is recommended to use a fixing tool.

Process diagram
Glue on cleaned material→mold rolling→UV curing→setting, remove glue residue→UV curing, improve performance

Notes
1. Ensure that the UV adhesive layer absorbs sufficient ultraviolet energy to achieve the curing effect, otherwise it will easily affect the performance of the adhesive layer.
2. The remaining glue cannot be returned to the original packaging, it should be sealed in the dark and stored at room temperature.

Product photos

Application



Factory Tour


Lencolo's exhibition


Lencolo's team memebers



Fast and cost-effective shipping service



FAQ
1) Are you a factory or trading company ?
A: We are a professional factory with over 5 years producing experience, warmly welcome to visit our factory anytime.

2) MOQ
A: 1KG

3) How about testing samples?
A: We can provide free samples for your testing, please contact us and inform us your detailed requirements.

4) What about the lead time?
A: Samples within 3 working days, mass production around one to two weeks.
(The specific delivery time would be determined by the ordered products and quantity)

TDS and SAMPLE are avaiable for evaluation, Should you have any question, please feel free to contact us.