Description
SQ-720002 One-component UV light hardening liquid is mainly used for hardening the surface of PC, PET, PMMA, PC/PMMA composite sheet or film. It can be coated by spraying, drenching, roller coating, etc. After the coating is formed into a film, it has good adhesion to the substrate and can protect the surface of the coated material for a long time. The coating process is simple and the production efficiency is high. The coating has good optical properties, no rainbow pattern, high cross-linking density, low curing shrinkage, extremely high hardness, excellent wear resistance, and good anti-graffiti performance. It can be used to make texture decoration and shell molding of mobile phones, notebook computers, home appliances and other products. Good chemical resistance, high transparency, steel wool resistance 50-200 times.
Chemical & physical data
| Appearance |
Transparent liquid |
| Viscosity (rock -2 cup) |
8.5-9.5 |
| UV Component (solid content %) |
35±2 |
| Density (g/cm3,25ºC) |
0.90±0.05 |
| Coating hardness (1kg load) |
2H-5H |
| Coating thickness( μ m) |
5-15 |
| Boiling performance (100 ºC / 60min) |
Adhesion 5b,No change in coating |
| Bending (cylindrical shaft diameter) |
35nm |
| Curing energy (mercury lamp, MJ / cm2) |
600-1000 |
| QUV resistance |
300h |
Wear resistance (1kg load, wear resistance)
Machine, 1 * 1 grinding head, 0000# steel velvet) |
100 times, no defects |
| Graffiti proof (Zebra oil pen) |
Oil-repellent, easy to wipe off |
| Water contact angle |
100-105° |
| Note: the above performance parameters can be customized according to customer requirements |
Performance
The product is suitable for hardening the surface of PC, PET, PMMA, PC/PMMA composite sheet and other sheet and film material;
Oil pen graffiti resistance, easy to clean, good wear and scratch resistance
Good wetting performance to substrate, coating surface has low energy after film formed.
Slick hand-feeling
High and low temperature resistance, high humidity, chemical solvent resistance, moisture resistance, UV resistance. Stable performance in harsh environments.
Application
It is mainly used to make texture decoration and shell forming of mobile phones, laptops, household appliances and other products
Construction technology
1. The common coating methods of UV wear-resistant hardening fluid are spraying, drenching and roller coating. Please avoid exposure to sunlight;
2. The product does not need any pretreatment (including dilution). Shaking is recommended before coating.
3. When spraying, the nozzle of spraying equipment shall spray from left to right from the same horizontal line,Refer to the instructions of the equipment manufacturer for the specific process.
4. After coating, keep the plate running vertically for about 2min to make it volatilize and level freely,
Then enter the 60-70 ºC oven and keep heating vertically for 5min.
5.After heating, enter the UV curing lamp area for conventional curing, and the specific curing time shall be determined.It is suggested to adjust according to the energy of the lamp. If conditions permit, the time can be extended appropriately.
6. After curing, the properties of the material can be measured directly after cooling to room temperature.
7. After coating, please clean the equipment thoroughly with organic solvent.
Notes
1. This product has been diluted to the solid content and viscosity suitable for coating. It does not need to be diluted before use,
If customers need products with high solid content and can be opened and diluted, our company can provide them according to customers' specific requirements
Corresponding products with high diluent and solid content;
2.This product contains inflammable components. Pay attention to fire prevention during transportation, storage and use.
Product photos
Application
Factory Tour
Lencolo's exhibition
Lencolo's team memebers
Fast and cost-effective shipping service
FAQ
1) Are you a factory or trading company ?
A: We are a professional factory with over 5 years producing experience, warmly welcome to visit our factory anytime.
2) MOQ
A: 1KG
3) How about testing samples?
A: We can provide free samples for your testing, please contact us and inform us your detailed requirements.
4) What about the lead time?
A: Samples within 3 working days, mass production around one to two weeks.
(The specific delivery time would be determined by the ordered products and quantity)
TDS and SAMPLE are avaiable for evaluation, Should you have any question, please feel free to contact us.
){kind=link}