Sq-710003 Wear-Resistant Matte UV Transfer Adhesive Glue for Screen Printing

• CAS No.: UV Transfer Adhesive Glue
• Formula: UV Transfer Adhesive Glue
• EINECS: UV Transfer Adhesive Glue
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SQ-710003
• Molecular Principal Chain: UV Transfer Adhesive Glue
• Color: Transparent Liquid
• Viscosity (25ºC, Cps): 150-250cps
• UV Component (Solid Content %): 100
• Transport Package: Barrel
• Specification: 1KG
• Trademark: Lencolo
• Origin: China Guangdong
• Production Capacity: 50000kg

Product Description

Description
SQ-710003 Single component of UV curing glue, through various patterns and structural mold formed in PC, PET and TPU and other film surface. It can be manually transferred to the surface of the film in batches using small molds, or it can be automated, high-capacity structured rollers or Textured film transfer. Mainly used to make the texture decoration and shell moulding of mobile phones, laptop computers, home appliances and other products. The product has the characteristics of good demoulding performance, high hardness, good plating ability, recoating ability and ultraviolet aging resistance performance.

Chemical & physical data

Appearance	Transparent liquid
Viscosity (25ºC, CPS)	150-250CPS
UV Component (solid content %)	100
Density (g/cm3,25ºC)	1.03±0.05
Coating hardness (1kg load)	B-H
Coating thickness( μ m)	5-25
Boiling performance (100 ºC / 60min)	Adhesion 5b
Bending (cylindrical shaft diameter)	180 fold in half without row lines
Curing energy (Curing machine, MJ / cm2)	600-1000
QUV resistance	over 200h
Note: the above performance parameters can be customized according to customer requirements

Performance
The matte effect is fine, the hand feel is good, and the scratch resistance is good;
Good yellowing resistance and transparency;
Good tensile property and low shrinkage. After curing, a flexible protective layer is formed, and the film thickness can be made
To 10-100um, the 180 degree bending adhesive layer will not crack, bend or fall off;
It has good resistance to high and low temperature, high humidity, chemical solvents, moisture and ultraviolet rays
Stable performance in harsh environments.

Application
It is mainly used to make texture decoration and shell forming of mobile phones, laptops, household appliances and other products.

Construction technology

1. Clean the material surface.
2. Pour the glue into the metal mold to make the PC or pet fit with the metal mold, squeeze the material surface with a glue stick to make the glue discharge the bubbles and level them better, and make sure that the bonding parts are covered with glue.
3. Irradiate with an ultraviolet lamp with a wavelength of 265 or 395 nm. When irradiating, the ultraviolet lamp shall be close to the glue as much as possible, so as to speed up the curing speed.
4. Tear PC or pet from the metal mold. At this time, the adhesive layer is completely stripped and adhered to the surface of PC or pet.

5. If the adhesive layer is not completely cured, you can continue to irradiate it with ultraviolet lamp until the adhesive layer is fully cured.

Process diagram
Unwinding → gluing release film with special treatment → mold rolling → UV curing → demoulding → winding → printing ink, etc. → slitting → molding → injection molding → tearing off the surface polyester film → spraying the hardened layer


Points for attention

1. Ensure that the UV adhesive layer absorbs sufficient UV energy to achieve the curing effect, otherwise it is easy to affect the performance of the adhesive layer.

2. The remaining glue shall not be returned to the original packaging. It shall be sealed away from light and stored at room temperature.

Storage, shelf time and Packing
This product will be functional for 6 months as long as storing under normal temperature and keeping away from heat and light.
1kg / 5kg / 25kg / barrel.

Tips: SQ-710003 wear-resistant matte UV transfer glue, it has fine matte effect, good hand feel, good scratch resistance, low viscosity.

The information contained in this TDS is intended as advice only and whilst the information is provided in utmost good faith and has been based on our best information currently available, is to be relied upon at the user's own risk. No representations or warranties are made with regards to its completeness or accuracy and no liability will be accepted by San Qi Chemical for damages of any nature whatsoever resulting from the use of or reliance on the information.



FAQ
1) Are you a factory or trading company ?
A: We are a professional factory with over 5 years producing experience.

2) MOQ
A: 1KG

3) How about your payment?
A:30% deposit in advance, 70% balance by T/T, L/C, paypal, Western Union or else before shipment.

4) What about the lead time?
A: Samples around one week, mass production around two weeks. (The specific delivery time would be determined by the ordered products and quantity)

TDS and SAMPLE are avaiable for evaluation, Should you have any question, please feel free to contact us.